Reverse osmosis WaterLovers 1000 GPD

0.00  available on subscription

[ApSC sc_key=”sc1984610469″][/ApSC]
[ApSC sc_key=”sc3720622808″][/ApSC]

Out of stock

Simple design: two large pre-filters, type BB10′, and an osmotic membrane of 1000 GPD. The simple design and compact size allow easy transport, quick installation and connection to the water supply at virtually any location, e.g. when out in the garden.

Ideal for those who need plenty of clean water to fill their aquarium tank, now you don’t have to carry the water tank with you – you can produce crystal clear water in the right place.

[ApSC sc_key=”sc2007723923″][/ApSC]
[ApSC sc_key=”sc2007395547″][/ApSC]
[ApSC sc_key=”sc3432219613″][/ApSC]

[ApSC sc_key=”sc3436218356″][/ApSC]

All you need to do is connect the RO system to the hose (connector included). Depending on the quality of the water supplied, you can get up to 3800 litres per day. The unit does not need electricity and can run non-stop.

Included: user manual, flexible water hose (10 metres), all installation accessories and valve.

Actual, tested system capacity: 1200-1440 litres per day
Test conditions:
Water temperature: 18 °C
Salinity 650 ppm
Water pressure: 4 atm
Water hardness: 0° N

TECHNICAL CHARACTERISTICS

Supply water temperature: 5 – 40°C
Min. water pressure: 3 atm
Max. 6 atm
Recommended water pressure: 4 atm
Max. Water salinity: 2000 ppm
Supply water connections: three sets:
1. Connector for 3/4” hose
2. Female 3/4” connector
3. Female connector 1”
Clean water supply hose: 1/4”
Drainage: 1/4”
Dimensions: height 47 cm, width 50 cm, depth 18 cm

The set does not contain parts that stop the water from flowing down the drain when the filtered water is turned off. To stop the flow of water, it is necessary to shut off the water to the whole system or to install parts that stop the outflow to the sewer. The value of the parts is approximately EUR 25.00.

The wastewater system shut-off kit can be found below (under the description of this product).

FILTRATION STAGES

1. Polypropylene filter 5 micron
2. Carbon block filter
3. Osmosis membrane

SPECIFICATIONS

Very easy to install
Easy to transport
No need for electricity
Easy to expand and configure
Very low water waste – approx. 1 litre of 1 litre of clean water
Extremely low operating costs
Immediate operation – clean water immediately after installation
Exceptionally easy to use and maintain
Standard filter cartridges are commonly used

[ApSC sc_key=”sc2405632435″][/ApSC]
[ApSC sc_key=”sc2074007692″][/ApSC]
[ApSC sc_key=”sc1638389514″][/ApSC]
[ApSC sc_key=”sc2565111130″][/ApSC]
[ApSC sc_key=”sc2895577841″][/ApSC]
[ApSC sc_key=”sc3300756167″][/ApSC]

Shopping Cart