The source of pure osmotic water for your aquarium is a filter specially designed for aquariums.
It is a reverse osmosis water filtration system, providing clean and well-oxygenated water for all aquariums. The filter is ideal for freshwater aquariums.
The filter is made of large 2.5″ cartridges with increased absorption.
[ApSC sc_key=”sc1877650667″][/ApSC]
[ApSC sc_key=”sc2007723923″][/ApSC]
[ApSC sc_key=”sc3432219613″][/ApSC]
THE SYSTEM CONSISTS OF:
1. Mechanical filter 1μm
2. Activated carbon filter
3. Membrane housing with flow restrictor
4. Osmosis membrane with a permeability of 75 GPD
5. 1/2″ fitting with ball valve
6. 5 m hose
7. End caps to prevent the osmotic membrane from drying out
The system is ready to be connected to the water supply and wastewater systems.
TECHNICAL DATA
– operating pressure: 2.8-6 bar
– pH range: 4-10
– supply water temperature: 5-40°C
– efficiency up to 379 litres per day (depending on conditions) – 75 gpd membrane
– treated water recovery: 20-35%
– water purification efficiency: 90-95%
– dimensions of the filter: height: 16 cm, width: 33 cm, depth 16 cm
The set does not contain parts that stop the water from flowing down the drain when the filtered water is turned off. To stop the flow of water, it is necessary to shut off the water to the whole system or to install parts that stop the outflow to the sewer. The value of the parts is approximately EUR 25.00.
[ApSC sc_key=”sc1856320750″][/ApSC]
[ApSC sc_key=”sc2074007692″][/ApSC]
[ApSC sc_key=”sc1638389514″][/ApSC]
[ApSC sc_key=”sc2565111130″][/ApSC]
[ApSC sc_key=”sc3300756167″][/ApSC]
