The cost-effective osmotic filter provides clean and well-oxygenated water for all aquariums. This device is ideal for water production in marine and freshwater aquariums.
[ApSC sc_key=”sc1877650667″][/ApSC]
[ApSC sc_key=”sc2007723923″][/ApSC]
[ApSC sc_key=”sc3432219613″][/ApSC]
THE SYSTEM CONSISTS OF
1. Mechanical filter 5μm
2. Mechanical filter 1μm
3. Activated carbon filter
4. Membrane housing with flow restrictor
5. Mounting plate
6. Osmosis membrane with a capacity of 150 GDP / 567 litres per day
7. 1/2″ connection with ball valve,
8. Sewer connections
9. 2x 1.5 m hose 1/4”
10. Wrench for unscrewing housings
11. Flow restrictor
12. Demineralising filter
The system is ready to be connected to the water supply and wastewater systems.
Replacement of the demineralising filter – according to water quality. We recommend using TDS meters to monitor the quality of filtered water.
TECHNICAL CHARACTERISTICS
– operating pressure: 3-6 bar
– pH range: 3-11
– supply water temperature: 5-40°C
– throughput (under optimum conditions) 567 litres/day 150 GDP membrane
– treated water yield: 20-35%
– water treatment efficiency: 90-99%
– filter dimensions: height 39 cm, width 39 cm, depth 15 cm
The set does not contain parts that stop the water from flowing down the drain when the filtered water is turned off. To stop the flow of water, it is necessary to shut off the water to the whole system or to install parts that stop the outflow to the sewer. The value of the parts is approximately EUR 25.00.
[ApSC sc_key=”sc2405632435″][/ApSC]
[ApSC sc_key=”sc1856320750″][/ApSC]
[ApSC sc_key=”sc2074007692″][/ApSC]
[ApSC sc_key=”sc1638389514″][/ApSC]
[ApSC sc_key=”sc3108826126″][/ApSC]
[ApSC sc_key=”sc2565111130″][/ApSC]
[ApSC sc_key=”sc3300756167″][/ApSC]
