COMPATIBLE SYSTEMS
MECHANICAL WATER FILTRATION SYSTEM WATERLOVERS SST III (PP, PP1, CTO), code WL-SST3
MECHANICAL WATER FILTRATION SYSTEM US III (PP, PP1, CTO), code WL-US3
Also suitable for all standard reverse osmosis systems – a pre-filter set.
PRE-FILTERS
For membranes to last longer, the water must be pre-treated. Osmosis systems use pre-treatment filters for this. A pre-filter collects particles before the water reaches the membrane, which is usually more expensive than the pre-filter. The membrane is designed to filter the very smallest particles. Pre-filters help the membrane last longer and save you the money you would otherwise spend on frequent membrane replacement.
THE KIT INCLUDES
PP 5 MICRON FILTER
A mechanical filter whose function is to physically remove sediment, dirt and any particles using a barrier. This filter removes particles larger than 5 microns. PP filters are made of multi-layer microscopic polypropylene fibre. Thanks to the pore structure of the fibre, dirt is retained.
CTO FILTER
A carbon block filter made of monolithic activated carbon, which removes all organic substances, chlorine, odour and turbidity. Compared with a granular carbon filter, a carbon block has a much larger surface area and more active sites, so it is up to 25% more efficient than other types of carbon cartridges. It also filters mechanical impurities. Carbon cartridges are especially recommended for treating surface water.
A carbon block is a relatively new technology that uses activated carbon.
A carbon block has a solid monolithic structure and is technologically more advanced than traditional loose-media filters.
A carbon block is usually made from activated carbon powder mixed with ground polyethylene and sintered: fine carbon particles (20 to 50 microns) are “bonded” together by heat.
This produces an orderly sorption (absorption) medium whose properties, such as porosity, can be controlled during manufacturing. In addition, these properties remain constant throughout the service life.
Because the sorbent particles are bonded together, carbon blocks have practically no channelling effect, which is typical of ordinary loose-media filters.
PP 1 MICRON FILTER
A mechanical filter whose function is to physically remove sediment, dirt and any particles using a barrier. This filter removes particles larger than 1 micron. PP filters are made of multi-layer microscopic polypropylene fibre. Thanks to the pore structure of the fibre, dirt is retained.
FILTER MAINTENANCE AND REPLACEMENT INTERVALS
For the unit to work optimally, it needs regular maintenance. How often maintenance is needed depends on the feed water quality, how often the system is used and the amount of water filtered. The filter replacement intervals given for the filter are indicative. Remember that filter replacement frequency may vary, so we recommend monitoring changes in TDS in the purified water (measuring it at regular intervals with a TDS meter). If the TDS level changes significantly, replace the filters.
Product photos may differ from the actual appearance of the products, but their properties and technical specifications will not differ from the description. Products in the shop may also differ in colour, shape or other parameters from their actual size, shape and colour due to the characteristics of the Buyer’s display.




