4-stage reverse osmosis (RO) system
Filtration stages:
- PP sediment filter
- Activated carbon block
- RO membrane 200 GPD
- T33 carbon post-filter
Features:
- With pull-out quick-change bayonet filters
- Filter diameter: 70 mm
- Filter height: 290 mm (without cap) / 320 mm (with cap)
- Inlet/outlet connection: 1/4″ quick connect
- Wall-mounted, easy installation
- No electricity needed – saves energy
- Supplied with a premium faucet and water storage tank
- Filtration rate – 35 litres per hour.
- System size (without tank) – 350 x 340 x 430 mm.
- Package size – 430 x 370 x 430 mm.
- Weight: 11 kg
WATER HARDNESS UNIT CONVERSION
Water hardness is an indicator measured in specific units, usually showing the amount of Ca and Mg salts dissolved in water. It is expressed in mmol/l (millimoles per litre) or mg/l (milligrams per litre, CaCO3 equivalent).
Hardness levels
soft – 0–20 mg/l
fairly soft 20–40 mg/l
slightly hard 40–60 mg/l
fairly hard 60–80 mg/l
hard 80–120 mg/l
very hard >120 mg/l
As water hardness can also be measured in other units, you can use the table below to convert between units.

CONNECTION PARAMETERS
Connection sizes are usually given in inches, which causes confusion about which fittings to choose, as we are used to metric units – in this case millimetres. The ratio of inches to millimetres for fittings is roughly as follows; measuring with a caliper is recommended:

WARRANTY TERMS
24 months for personal use
12 months for commercial use











