Water softener “DUBAI EDITION” 7L

281.96 €

TECHNICAL DATA

Maximum flow with guaranteed softening: 0.75 m3/h
Resin volume (food-grade cation exchange resin): 7 litres
Working temperature: 5–45 °C
Recommended supply pressure: 1.5–3 bar
Water connection: 3/4″
Power supply: 220V / 50Hz (safety transformer included)
Number of people using the water: 2–4
Connection to the drain is required
Regeneration mode: volumetric
Regeneration time about 60 min.
Filter dimensions – 400*220*590 mm.

This is a fully automatic water softener that will give you a sense of comfort. A reliable control head and very compact dimensions. 

Food-grade cation exchange technology is used for water softening. It reduces limescale (calcium carbonate and magnesium carbonate) by replacing calcium and magnesium ions in hard water with sodium ions. When the resin is saturated, the regeneration function restores it.

EASY INSTALLATION

Install the unit on the main water inlet pipe after the water meter. Simple connection – you can do it yourself without losing the warranty. The whole unit is designed for 3/4″ connections, standard in most buildings. For proper installation, a drain for waste water and a power supply are required.

RELIABILITY

Efficient and reliable control valve.
Brine tank made of high-density, durable polyethylene.
Fibreglass-reinforced ion exchange resin vessel.

WATER HARDNESS UNIT CONVERSION

Water hardness is an indicator measured in specific units, usually showing the amount of Ca and Mg salts dissolved in water. It is expressed in mmol/l (millimoles per litre) or mg/l (milligrams per litre, CaCO3 equivalent).

Hardness levels
soft – 0–20 mg/l
fairly soft 20–40 mg/l
slightly hard 40–60 mg/l
fairly hard 60–80 mg/l
hard 80–120 mg/l
very hard >120 mg/l

As water hardness can also be measured in other units, you can use the table below to convert between units.

CONNECTION PARAMETERS

Connection sizes are usually given in inches, which causes confusion about which fittings to choose, as we are used to metric units – in this case millimetres. The ratio of inches to millimetres for fittings is roughly as follows; measuring with a caliper is recommended:

WARRANTY TERMS

24 months for personal use
12 months for commercial use

Shopping Cart